Graced with three distinctive colours – light grey, blue and anthracite – the display is distinguished by a direct tenth-of-a-second read-off. The red chronograph hand makes a full sweep of the dial in ten seconds, indicating with each jump successive tenths of a second on the 100 graduations of the flange and bezel. Zenith el primero chronomaster original full# In addition to measuring and displaying tenths of a second, this Chronomaster, operating at 36,000 vibrations per hour, features hour and minute functions in the centre, 60-minute and 60-second chronograph counters, running small seconds and date, while delivering a minimum 60-hour power reserve – meaning a whole weekend without having to wind the watch even if is not worn! Available in two limited series of 250 pieces each, fitted with a blue or black ceramic bezel, the Chronomaster 2 is a powerful distillation of Zenith‘s modern and sporty identity. Zenith el primero chronomaster original series#.Zenith el primero chronomaster original full#.Certainly, from an engineering standpoint, the two watches use significantly different movements, although what they do have in common is that both the Zenith 3600 and the Rolex 4130 are very much pieces of contemporary, high-tech mechanical horology. Whether or not the resemblance bugs you is a matter of taste – I suspect some folks will be put off by it, although considering a modified El Primero movement was used by Rolex for the first self-winding Daytonas, I'd propose that Zenith is, to some extent, entitled by history if nothing else to connect the dots a little. The color and the way the ceramic reflects the light on the Chronomaster Sport is insistently reminiscent of the Daytona bezel, but the typeface and function are quite different – the Daytona has a tachymetric scale and the Chronomaster Sport, graduations for reading off tenths and hundredths of a second. Zenith has used ceramic bezels before in the Chronomaster line, but as far as I have been able to determine, just on the two 50th Anniversary limited edition models (which were also launch platforms for the caliber 3600). I think what makes the resemblance seem so strong at first glance is the ceramic bezel. Zenith has gotten around this problem partly by using low-inertia silicon for the escape wheel, but a lot of the mitigation comes from customization of the driving and coupling wheels, each of which has a unique profile for the gear teeth. The amount of energy available is even less than at the fourth wheel, and adding the load of driving the chronograph is potentially even more problematic. The problem is even worse if you try to drive the chronograph off the escape wheel. Balance amplitude can drop significantly when a chronograph is switched on, and if the watch isn't in optimum condition, accuracy can suffer if you leave the chronograph on for long enough. Driving a chronograph from the fourth wheel is already kind of pushing it it's the last conventional wheel in the going train, and stealing energy from the gears at that point means less energy is available to reach the balance. The reason you don't usually see chronographs driven by the escape wheel is that, generally, it's a terrible idea to try.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |